Industrial - Applications
The Rize Kwik-loc can be used in many different applications from lighting to cable tray and duct work. Here are some of the many but you may find your own use!
![[I don't know how to describe this ...]](/images/HIGHBA_small.gif)
![[I don't know how to describe this ...]](/images/LUMINA_small.gif)
![[I don't know how to describe this ...]](/images/BUSDUC_small.gif){kind=small}
![[I don't know how to describe this ...]](/images/Hitchline_small.gif){kind=small}
![[I don't know how to describe this ...]](/images/CONDUI_small.gif)
Effect of hanging at angles on safe working loads
Kwik Locs can be used to suspend objects safely at angles of up to 60 degrees from the vertical. However suspension at angles does reduce the safe working load, as per the table below.
| Size | Vertical | 15° | 30° | 45° | 60° |
|---|---|---|---|---|---|
| 3/16 inch | 640 lbs | 625 lbs | 559 lbs | 455 lbs | 325 lbs |
| 1/8 inch | 250 lbs | 240 lbs | 215 lbs | 175 lbs | 125 lbs |
| 3/32 inch | 150 lbs | 144 lbs | 129 lbs | 105 lbs | 75 lbs |
| 1/16 inch | 75 lbs | 72 lbs | 64.5 lbs | 52.5 lbs | 37.5 lbs |
| Load | 100% | 96% | 86% | 70% | 50% |
- lighting
- fluorescent
- H.D.
- Cable tray
- Conduit
- CC-TV cameras
- Lighting rafts
- Bus way
- Audio systems
- Trunking
- Infrared heating
- Ductwork
- Antenna anchors
MANUFACTURER'S RECOMMENDATIONS
DO NOT USE FOR LOADS OUTSIDE THE STATED RANGE OF THE PRODUCT. DO NOT EXCEED THE SAFE WORKING LOAD OF THE PRODUCT. DO NOT USE ON COATED WIRE ROPE. DO NOT APPLY PAINT OR OTHER COATING. DO NOT APPLY LUBRICANT. DO NOT USE FOR LIFTING. KEEP THE PRODUCT CLEAN AND FREE FROM DIRTREMOVE DAMAGED CABLE END PRIOR TO INSERTING INTO THE CL23. DO NOT USE IN CHLORINATED ATMOSPHERES
